草莓视频IOS在线下载,草莓视频官方网站,草莓视频污成年人国产,草莓视频成人黄APP免费观看

Welcome to Dongguan Haochen Hot Runner Technology Co., Ltd!
中文    EN

Haochen 20 years of focus on multimode cavities and small spacing hot runner

Service /


mobiles: 13712972461
Tel: 0769-85478528
400-0988-117
Fax: 0769-85478508
Email: sales@zzyjg.com
Website: www.zzyjg.com
Address: No. 11 Zhenlang Road, Wusha Caiwu Industrial Second Road, Chang'an Town, Dongguan City
Industry NewsYour locations: Home > News > Industry News

Control gate opening time of needle valve hot runner

Publisher: Administrator Date: 2023-11-02

Needle valve hot runnerControl gate opening time of

1. Needle valve hot runner, by controlling the gate opening time, ensures smooth filling of the mold cavity and balanced melt flow, and eliminates welding marks.

The injection molding manufacturing of large injection molded parts usually requires two or more hot gates to fill. For ordinary hot pouring systems, the gate opens simultaneously at the beginning of injection. This glue feeding method inevitably has fusion defects, that is, when two strands of molten material converge at the front, fusion marks are formed due to the inability of the two strands of molten material to completely melt into one, and react on the surface of the product, which is commonly known as fusion marks. Although improvements can be made by increasing the melt temperature, increasing the holding pressure, and adjusting injection molding process parameters, the actual improvement effect is limited. By using needle valve hot runner technology to construct a pouring system, program control can be achieved for the opening and closing of each valve gate. It can also control the opening of the valve needle and the opening of the second gate when the first melt just flows through the second gate. At this time, the first gate can be opened or closed as needed, and continue until all gates are opened and the mold cavity is filled, allowing the melt to fully fuse and obtain products without fusion marks.

2. The product obtained by using this technology will not have any residual gate marks, so it is suitable for processing injection molded parts with high surface quality requirements.

Sometimes the reason for using a valve gate is because the marks on the workpiece are smooth, equivalent to the marks left by an ejector pin, so it is much smaller than the end marks of latent gates and other types of hot runners.

3. More effective control of holding and forming cycles.

The needle valve hot runner can use larger diameter gates, which can accelerate the flow of melt in the mold cavity, shorten the forming cycle of the workpiece, and better maintain pressure.

4. Effectively reduce the internal stress of the product and improve the stability of the product.



Dongguan Haochen Hot Runner Technology Co., Ltd
Contact Us:
mobiles: 13712972461
Tel: 0769 85478528/400 0988 117
Fax: 0769-85478508
Email: sales@zzyjg.com
Website: www.zzyjg.com
Address: No. 11 Zhenlang Road, Wusha Caiwu Industrial Second Road, Chang'an Town, Dongguan City

粵ICP備56353880號
CopyRight © 2023 Dongguan Haochen Hot Runner Technology Co., Ltd. All Right Reserved.

Online
Service

ConsultationTime:9:00-18:00

Select customer service:

Hot
Line

400-0988-117
7*24H Service

Follow
Us

Website
TOP
網站地圖草莓视频网站 草莓AV在线播放 草莓视频官网 丝瓜在线观看视频 国产精品蜜桃久久久久 麻豆电影在线 好色视频APP在线观看 草莓视频下载链接